Ph/txt: 519-686-1123
TF - ph:  800-265-5747
“Doing it right today…to earn your business tomorrow.”

RECONDITIONED CAT 816K (2017)  UNIT# C2171

MACHINE HOURS: 6995
previous arrow
next arrow
previous arrow
next arrow
Repair / Condition Report

At 5,823 hours, CAT dealer completed the following repairs:

Due to engine piston ring and bores being out of spec;

- NEW CAT long block engine was installed

- NEW injectors were installed

- NEW NRS cooler was installed

- NEW NRS control valve was installed

- Engine was dyno tested

Upon arrival to our yard, all panels and belly pans removed and machine thoroughly power washed

Local CAT dealer was hired to perform the following;

CAT TA1 inspection

Perform performance checks

Complete pressure checks

Cut open all filters to inspect for contaminates

Change all breathers and required vents

Inspect magnetic plugs

Inspect magnet/suction screens

Go through all emission system checks

Update ECM flash files

From the inspection, they completed the following repairs;

Installed NEW #2 speed sensor

Installed NEW NOZ sensor wiring harness

Resealed rear axle sections due to leak between joints

Installed NEW yoke seals on front and rear axles

Installed NEW yoke bearings on front axle

Installed NEW center driveshaft u-joints

Marcel Equipment completed the following;

Resealed left steering cylinder

Installed NEW pin and bearings in rod end of steering cylinders

Resealed blade lift cylinder

Installed NEW bushings in steering control lever

Serviced and cleaned complete HVAC system

Verified operation of electrical switches and components

Tested and serviced batteries and connections

Greased machine

Completed any other required repairs

Unit will have all cosmetic repairs completed & then be sand blasted, primed, painted & detailed

Pictures will be updated at that time.

 

 

 

RECONDITIONED CAT 816K

Price: $
0
 CAD
Price: $
0
 USD
Head Office London, Ontario, Canada

RECONDITIONED CAT 816K (2017)UNIT# C2171

MACHINE HOURS: 6995
Repair / Condition Report

At 5,823 hours, CAT dealer completed the following repairs:

Due to engine piston ring and bores being out of spec;

- NEW CAT long block engine was installed

- NEW injectors were installed

- NEW NRS cooler was installed

- NEW NRS control valve was installed

- Engine was dyno tested

Upon arrival to our yard, all panels and belly pans removed and machine thoroughly power washed

Local CAT dealer was hired to perform the following;

CAT TA1 inspection

Perform performance checks

Complete pressure checks

Cut open all filters to inspect for contaminates

Change all breathers and required vents

Inspect magnetic plugs

Inspect magnet/suction screens

Go through all emission system checks

Update ECM flash files

From the inspection, they completed the following repairs;

Installed NEW #2 speed sensor

Installed NEW NOZ sensor wiring harness

Resealed rear axle sections due to leak between joints

Installed NEW yoke seals on front and rear axles

Installed NEW yoke bearings on front axle

Installed NEW center driveshaft u-joints

Marcel Equipment completed the following;

Resealed left steering cylinder

Installed NEW pin and bearings in rod end of steering cylinders

Resealed blade lift cylinder

Installed NEW bushings in steering control lever

Serviced and cleaned complete HVAC system

Verified operation of electrical switches and components

Tested and serviced batteries and connections

Greased machine

Completed any other required repairs

Unit will have all cosmetic repairs completed & then be sand blasted, primed, painted & detailed

Pictures will be updated at that time.

 

 

 

RECONDITIONED CAT 816K

Price: $
0
 CAD
Price: $
0
 USD
Head Office London, Ontario, Canada
© 2022 · Marcel · Site by Erentzen.com
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram