Upon arrival to our yard, all covers & guards were removed & machine was power washed

Both visual & operational inspections were completed

The machine was serviced as follows:

Engine oil & filter changed

Filter was cut open & checked for contaminates - clean

Transmission oil & filter changed, filter was cut open & checked - clean

Hydraulic oil & filter changed, filter was cut open & checked - clean

Both differential oil levels good & oils clean

Checked center hitch - good

Marcel Equipment completed the following repairs:

Installed REBUILT fuel injection pump

Installed REMAN fuel injectors

Completed engine valve set

Resealed oil filter housing

Resealed fuel pump

Installed NEW fuel priming pump

Installed NEW engine belts

Installed REBUILT starter

Installed NEW engine thermostats

Transmission was leaking between sections

Removed transmission, disassembled, inspected & resealed

Disassembled torque, inspected & resealed

Disassembled transfer case, inspected & resealed

Disassembled & inspected parking brake

Installed NEW seals & bushings in rear axle oscillation 

Resealed steering cylinders

Installed NEW pins & bushings in steering cylinders

Went through cab & repaired all required items

Checked all gauges & controls

Replaced glass in cab where needed

Tightened blade control lever

Installed NEW seat cushion

Cleaned & serviced complete HVAC system

Checked A/C & heater

Serviced battery connections

Replaced all required hoses, lines & tubes

All grease points checked & machine greased

Engine, torque, transmission & hydraulic pressures were checked - all within spec

All repairs have been completed & machine will soon enter our paint facility for sand blast, prime, paint & detailing.