The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine;

At 8,544 hours, CAT REBUILT engine installed

At 8,544 hours, rad assembly was cleaned & pressure tested

At 8,544 hours, steering cylinder bores were line bored

At 10,054 hours, 2,000 hour service was completed

At 10,077 hours, rear axle was REBUILT

At 10,108 hours, NEW heater valves installed

At 10,490 hours, NEW rear drive shaft & yoke installed

At 10,490 hours, 500 hour service was completed

At 10,490 hours, engine valve set was completed

At 10,593 hours, axle oils were changed

At 10,795 hours, 500 hour service was completed

At 10,805 hours, NEW transmission ECM installed

At 11,145 hours, 1,000 hour service completed

At 11,500 hours, 500 hour service completed

At 11,572 hours, axle oils were changed

At 11,731 hours, 250 hour service was completed

At 11,748 hours, NEW hanger bearing installed

At 11,748 hours, parking brake assembly was REBUILT

At 11,865 hours, 500 service completed