Ph/txt: 519-686-1123
TF - ph:  800-265-5747
“Doing it right today…to earn your business tomorrow.”

KOMATSU WA500-7 (2013)  UNIT# L0437

MACHINE HOURS: 17610
previous arrow
next arrow
previous arrow
next arrow
Repair / Condition Report

The following was completed by Marcel Equipment;

Upon arrival to yard, machine was completely stripped for powerwashing

Machine was inspected visually & operationally

Transmission filters were cut open - they were clean

Hydraulic filters were cut open - they were clean

Axle oils were checked - they were at proper level & were clean

All oils were changed

The following pressures were taken to ensure within OEM spec;

  • Engine oil pressures
  • Engine boost pressure
  • Transmission main pressures
  • Torque convertor inlet & outlet pressures
  • Transmission lube pressure
  • Steering pressure
  • Main hydraulic pressure
  • Brake cut-in & cut-out pressures
  • Brake accumulator pressure
  • Ride control accumulator pressure
  • Stall speeds single & double
  • Fan min & max speeds

The following repairs were completed by Marcel Equipment;

REMAN KDPF complete assembly installed

Completed bottom end bearing roll-in on engine

Resealed oil pan

Installed NEW rear main seal

Installed NEW main chassis wiring harness

Replaced hose & lines as required on machine

Verified all cab functions & switches

Completed required repairs in cab

Cleaned & inspected HVAC system

Installed NEW bucket pins

Installed NEW bushings in bucket joints

This unit is ready to go to work

 

KOMATSU WA500-7

Price: $
250000
 CAD
Price: $
195000
 USD
Head Office (Marcel London) London, Ontario, Canada

KOMATSU WA500-7 (2013)UNIT# L0437

MACHINE HOURS: 17610
Repair / Condition Report

The following was completed by Marcel Equipment;

Upon arrival to yard, machine was completely stripped for powerwashing

Machine was inspected visually & operationally

Transmission filters were cut open - they were clean

Hydraulic filters were cut open - they were clean

Axle oils were checked - they were at proper level & were clean

All oils were changed

The following pressures were taken to ensure within OEM spec;

  • Engine oil pressures
  • Engine boost pressure
  • Transmission main pressures
  • Torque convertor inlet & outlet pressures
  • Transmission lube pressure
  • Steering pressure
  • Main hydraulic pressure
  • Brake cut-in & cut-out pressures
  • Brake accumulator pressure
  • Ride control accumulator pressure
  • Stall speeds single & double
  • Fan min & max speeds

The following repairs were completed by Marcel Equipment;

REMAN KDPF complete assembly installed

Completed bottom end bearing roll-in on engine

Resealed oil pan

Installed NEW rear main seal

Installed NEW main chassis wiring harness

Replaced hose & lines as required on machine

Verified all cab functions & switches

Completed required repairs in cab

Cleaned & inspected HVAC system

Installed NEW bucket pins

Installed NEW bushings in bucket joints

This unit is ready to go to work

 

KOMATSU WA500-7

Price: $
250000
 CAD
Price: $
195000
 USD
Head Office (Marcel London) London, Ontario, Canada
© 2022 · Marcel · Site by Erentzen.com
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram