The following repairs were completed by the servicing CAT dealer;

At 6,171 hours, engine was replaced with NEW CAT drop-in complete engine & NEW pins & bushings installed in hard nose

At 7,716 hours, equalizer bar was REBUILT with NEW pins & bearings

At 7,816 hours, NEW track cannon bushings & seals were installed

At 8,364 hours, NEW NRS cooler was installed

Upon arrival to yard, machine was stripped of all belly pans & panels for power washing

Due to our work load, local CAT dealer was hired to perform the following:

CAT TA1 inspection

Cut open all filters to inspect for contaminates - clean

Serviced machine with new oils

Performed performance checks on unit

Checked all engine, torque, transmission & hydraulic pressures on machine

Checked all magnetic plugs - all clean

Checked magnet/suction screens - all clean except transmission, see below for repair

Updated ECM's to latest flash files

Serviced emissions system & performed testing

They then completed the following repairs from the inspection;

Installed NEW ARD head spark plug

Installed NEW ether valve & bottle

Changed all hydraulic lines around fan area

Changed hydraulic oil cooler lines

Changed hydraulic lines for skid pan cylinders

Marcel Equipment completed the following work:

Complete visual & operational inspections were done

Due to the plastic thrust washer pieces found in transmission screen, the left brake assembly was removed & disassembled

Installed NEW friction discs & resealed brake piston

Installed NEW speed sensors

Installed NEW steering motor sensor

Replaced required hoses within chassis

Resealed starter & mount

Installed NEW track cannon seals on both frames

Replaced all wipers & installed NEW washer pumps where needed

Installed NEW rad cap

Installed NEW transmission shaft lip seal

Installed NEW pins, bearings & bushings in blade where required

Line bored blade bores where required

Completed miscellaneous repairs as found on our inspection

Verified all switches in cab

Excellent tractor, ready to work.