When unit arrived in our yard, all panels were removed & complete machine was powerwashed & thoroughly inspected

Marcel Equipment then completed the following:

Cut open all filters to inspect for contaminates - all clean

Inspected all suction screens & magnets - all clean

Performed performance checks

Completed all pressures on machine to ensure within OEM specs

Updated ECM flash files

This unit was then put through our "Reconditioning Process"

Marcel Equipment performed the following repairs on the unit at 11,150 hours;

Inspected & repaired electrical bay

Replaced parking brake valve

Repaired loose steering control

Resealed blade cylinder

Resealed parking brake

Rebearing & resealed center hitch

Line bored center hitch bores

Replaced all required hoses, lines & tubes

Repaired swing out fenders

Resealed steering cylinders & installed NEW bushings & pins

Installed REBUILT starter & resealed

Drained & flushed fuel tank

Installed CAT REMAN fuel transfer pump

Serviced & cleaned complete HVAC system

Completed all required repairs in the cab

Verified all switches were functional

Installed NEW center belly pan cylinder

Completed in-frame on engine at 11,220 hours:

- CAT REMAN cylinder packs

- All NEW bottom end bearings

- REBUILT cylinder head

- CAT REMAN engine oil pump

- REBUILT injectors

- Rear crank seal

All required cosmetic & welding work was completed to machine

Machine was then sand blasted & painted

Unit was then sent out on rent to a local customer

At 12,680 hours, CAT installed:

A NEW fuel pump

A NEW A/C compressor & belt

A NEW condenser 

Checked A/C, working well