CAT dealer performed the following repairs:

At 7,163 hours, performed bearing roll-in on engine

Installed NEW engine oil pump

At 9,287 hours, resealed blade lift cylinder

At 10,763 hours, performed transmission, torque & joystick calibrations

At 11,787 hours, resealed both blade tilt cylinders

At 12,049 hours, installed a CAT Reman turbo charger

The following checks & servicing were completed by Marcel Equipment @ 14,395 hours:

Upon arrival to our yard, all covers & guards were removed & machine was properly power washed

Visual & operational inspections were completed

Engine oil filter cut open & checked for contaminates - all clean

Transmission filters were cut open & checked for contaminates - all clean

Hydraulic filters were cut open & checked for contaminates - all clean

All suction screens & magnets were checked for contaminates - all clean

Checked both differentials, oil levels good & oils clean

Changed all oils

Checked brake system - good

Checked parking brake - good

Checked articulation - good

Checked rear axle oscillation - good

Verified the following pressures to ensure within OEM specs:

Hydraulic

Steering

Pilot

Fan

Transmission pump

Transmission lube

Torque inlet

Torque outlet

Lock-up clutch

Impeller clutch

Engine oil

Fuel

Boost

Accumulator

Stall speed and full stall

Marcel Equipment completed the following repairs @ 14,395 hours:

Resealed torque converter 

Resealed transmission

Installed all NEW directional clutch discs & 3 for first speed

Resealed transfer case

Inspected all internal components for reuseability

REBUILT parking brake assembly

Calibrated transmission

Serviced electrical bay

Cleaned & serviced complete HVAC system

Serviced A/C system

All NEW u-joints installed

Replaced heater hoses & coolant taps

Repaired window washers & wipers

Repaired grease lines as required

Resealed starter 

Installed NEW A/C & alternator belt

Installed NEW belt tensioner

Resealed fan pump mounting

Serviced A/C system & installed NEW dryer

Resealed valve cover & valve cover base

Replaced worn lines, hoses & tubes

Installed REBUILT alternator

Installed all NEW hoses for torque & transmission 

Installed NEW front & rear pinion seals

Installed NEW rad cap

Installed NEW starter relay

Completed all needed miscellaneous repairs

Verified auto grease operation

Checked all gauges, controls, switches, lights 

Tested batteries & serviced connections

All needed repairs & servicing has been completed.

This unit is now ready to work!