The following was completed by Marcel Equipment:

Upon arrival to our yard, all covers & guards were removed & machine was power washed

Visual & operational inspections were completed

Engine oil filter was cut open & checked for contaminates, all clean

Transmission filters were cut open & checked for contaminates, all clean

Hydraulic filters were cut open & checked for contaminates, all clean

All suction screens & magnets were checked for contaminates, all clean

Checked both differentials, oil levels good & oils clean

Changed all oils

Changed coolant

Checked brake system, good

Checked parking brake, good

Checked articulation, good

Verified the following pressures to ensure within OEM specs:

- Hoist

- Steering

- Brake

- Pilot

- Engine oil

- Fuel

- Boost

- Transmission pump

- Transmission lube

- Torque inlet

- Torque outlet

- Accumulator

- Stall speed and full stall

Replaced transmission speed sensor

Replaced transmission solenoids

Replaced torque converter speed sensor

Replaced remote ground shutoff switch

Replaced blade cylinder mounting bushings

Replaced blade mount yoke bearing

Installed REBUILT turbo

Installed NEW exhaust heat wrap

Installed NEW fuel separator housing

Installed NEW engine belts

REBUILT parking brake assembly

Replaced required lines, hoses & tubes (almost all NEW hoses installed)

Serviced electrical bay

Cleaned & serviced complete HVAC system

Serviced A/C system

Reconditioned cab

REBUILT throttle pedal

REBUILT blade control joystick

Checked all gauges, controls, switches & lights

Completed all required misc repairs

Checked all grease lines & greased unit

Tested & serviced batteries & connections

All mechanical & cosmetic repairs have been completed

Machine was then sand blasted, primed, painted & detailed.