At 7,651 hours, CAT dealer performed the following:

Transmission & torque converter REBUILT

Installed NEW bearings & seals

Installed NEW solenoid valves & harnesses

Installed NEW transmission case

Installed NEW shafts & gears where needed

Bench tested after REBUILD

Steering pump replaced with REMAN

At 8,355 hours, the following repairs & service were done by Marcel Equipment;

Upon arrival to our yard, all covers & guards were removed & machine was power washed

Visual & operational inspections were completed

Engine oil filter cut open & checked for contaminates - all clean

Transmission filter changed & suction screen checked - all clean

Checked both differentials, oil levels good & oils clean

Checked brake system - good

Checked parking brake - good

NEW radio installed

Checked all grease lines & greased unit

NEW rear differential pinion seal installed

Installed NEW cab mounts

Installed NEW A/C lines

Installed NEW ether injector

Removed & resealed starter

Resealed pilot valve

Cleaned heater core

Installed NEW rear wiper

Installed NEW valve cover gasket

Set intake & exhaust valve clearance

Installed NEW fuel injectors

Engine oil pan gasket was leaking a bit of oil

We took the opportunity to roll NEW CAT standard size main, thrust & rod bearings

Removed & inspected engine oil pump - good

This is an ex municipal unit & well maintained 

All mechanical & cosmetic repairs have been completed 

This unit will soon enter our paint facility where it will be sand blasted, primed, painted & detailed.