Upon arrival to our yard, all covers and guards were removed and unit was completely power washed
Operational and visual inspections were completed
A thorough mechanical inspection was completed
Machine was serviced as follows:
- All oil filters were changed
- All oils in engine, trans, hydraulic and differentials were changed
- Engine oil filter was cut open and checked for contaminates - all clean
- Transmission filter was cut open and checked, all clean
- Hydraulic filter was cut open and checked, all clean
- All 4 wheel planetary oil levels were good and oils clean
- Both differential oil levels were good and oils were clean
- Changed fuel filters
The following repairs have been completed:
- Replaced lower articulation hitch plate and bolts. Articulation pins and bearings are tight
- Replaced rear axle oscillation bushings and seals
- Blade mounts are tight
- Removed fuel tank and cleaned
- Replaced front differential pinion seal
- Replaced rear differential pinion seal
- Installed NEW engine main, rod and thrust bearings
- Inspected engine oil pump and was like new
- Resealed engine oil pan
- Installed NEW engine wiring harness
- Installed NEW fuel injectors
- Replaced exhaust manifold
- Performed engine valve set
- Installed NEW radiator hoses
- Installed NEW thermostat
- Replaced air compressor governor and hoses
- Installed NEW A/C belt, fan belt, alternator belt
- Installed NEW fuel tank sending unit
- Resealed both steering cylinders
- Replaced steering cylinder bushings
- Installed NEW battery cables
- REBUILT starter
- Replaced hydraulic suction line
- Installed NEW cab mounts
- Installed NEW AC condenser and NEW lines
- Checked grease lines and greased machine
- All switches, controls and gauges checked
- A/C and heater checked
- Replaced any hydraulic / transmission lines showing wear
- Completed all other miscellaneous repairs as needed
Following pressure tests were completed and are within CAT specs:
- Engine oil - high and low idle
- Fuel
- Turbo boost
- Transmission pump
- Primary
- Speed clutch
- Directional
- Lube
- Converter outlet
- Main hydraulic relief
- Steering
This unit has been completely sand blasted, primed, painted & detailed
This should be a good unit for a smaller landfill.
Price: $ 0 CAD |
Price: $ 0 USD |
RECONDITIONED CAT 816B (1986)UNIT# C6364 MACHINE HOURS: 8580 | |||
---|---|---|---|
![]() Repair / Condition Report Upon arrival to our yard, all covers and guards were removed and unit was completely power washed Operational and visual inspections were completed A thorough mechanical inspection was completed Machine was serviced as follows: - All oil filters were changed - All oils in engine, trans, hydraulic and differentials were changed - Engine oil filter was cut open and checked for contaminates - all clean - Transmission filter was cut open and checked, all clean - Hydraulic filter was cut open and checked, all clean - All 4 wheel planetary oil levels were good and oils clean - Both differential oil levels were good and oils were clean - Changed fuel filters The following repairs have been completed: - Replaced lower articulation hitch plate and bolts. Articulation pins and bearings are tight - Replaced rear axle oscillation bushings and seals - Blade mounts are tight - Removed fuel tank and cleaned - Replaced front differential pinion seal - Replaced rear differential pinion seal - Installed NEW engine main, rod and thrust bearings - Inspected engine oil pump and was like new - Resealed engine oil pan - Installed NEW engine wiring harness - Installed NEW fuel injectors - Replaced exhaust manifold - Performed engine valve set - Installed NEW radiator hoses - Installed NEW thermostat - Replaced air compressor governor and hoses - Installed NEW A/C belt, fan belt, alternator belt - Installed NEW fuel tank sending unit - Resealed both steering cylinders - Replaced steering cylinder bushings - Installed NEW battery cables - REBUILT starter - Replaced hydraulic suction line - Installed NEW cab mounts - Installed NEW AC condenser and NEW lines - Checked grease lines and greased machine - All switches, controls and gauges checked - A/C and heater checked - Replaced any hydraulic / transmission lines showing wear - Completed all other miscellaneous repairs as needed Following pressure tests were completed and are within CAT specs: - Engine oil - high and low idle - Fuel - Turbo boost - Transmission pump - Primary - Speed clutch - Directional - Lube - Converter outlet - Main hydraulic relief - Steering This unit has been completely sand blasted, primed, painted & detailed This should be a good unit for a smaller landfill. | RECONDITIONED CAT 816B
Head Office |