Ph/txt: 519-686-1123
TF - ph:  800-265-5747
“Doing it right today…to earn your business tomorrow.”

CAT 980M (2019)  UNIT# L4292

MACHINE HOURS: 8560
previous arrow
next arrow
previous arrow
next arrow
Repair / Condition Report

The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine;

At 460 hours, performed 500 hour service 

At 1,089 hours, performed 1,000 hour service 

At 2,094 hours, performed 2,000 hour service 

At 2,822 hours, performed 500 hour service 

At 3,578 hours, performed 1,000 hour service 

At 4,183 hours, installed NEW ARD head

At 4,253 hours, performed 500 hour service 

At 5,088 hours, installed NEW DPF assembly

At 5,120 hours, performed 2,000 hour service 

At 5,560 hours, performed 500 hour service 

At 6,078 hours, installed NEW auto greaser pump

At 6,078 hours, installed NEW fuel transfer pump

At 6,117 hours, performed 1,000 hour service 

At 6,120 hours, installed NEW fuel priming pump

At 7,464 hours, performed 2,000 hour service 

At 8,175 hours, performed 500 hour service 

At 8,284 hours, installed NEW steering control joystick

When unit arrived in our yard at 8,560 hours, we had local CAT dealer complete the following;

Machine was completely stripped for power washing

Performed CAT TA1 inspection 

Perform performance checks- boost, fuel pressure, hydraulic pressures, transmission pressures, etc.

Change & cut open all filters to inspect for contaminates

Inspect magnetic plugs/screens & suction screens

Update all ECM software as required               

Check for applicable service letters

Serviced emission system as required

Changed DEF filter

Changed spark plug

Marcel Equipment then completed the following;

Cleaned & serviced HVAC system

Shimmed boom at loader frame

Shimmed bucket joint

Resealed both steering cylinders

Line bored steering cylinder bores & installed bushings

Installed NEW pins & bearings in steering cylinders

Resealed right side tilt cylinder

Resealed both lift cylinders

Changed hydraulic oil after resealing all cylinders

Calibrated steering & implement circuits

Installed NEW seat belt

Replaced the left arm rest pins & bushings

Ride control accumulators charged to proper spec

Installed NEW armrests

Adjusted seat slides

Installed NEW engine belt

Completed miscellaneous minor repairs on machine

This unit is ready to go to work.

CAT 980M

Price: $
525000
 CAD
Price: $
392000
 USD
Head Office (Marcel London) London, Ontario, Canada

CAT 980M (2019) UNIT# L4292

MACHINE HOURS: 8560
Repair / Condition Report

The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine;

At 460 hours, performed 500 hour service 

At 1,089 hours, performed 1,000 hour service 

At 2,094 hours, performed 2,000 hour service 

At 2,822 hours, performed 500 hour service 

At 3,578 hours, performed 1,000 hour service 

At 4,183 hours, installed NEW ARD head

At 4,253 hours, performed 500 hour service 

At 5,088 hours, installed NEW DPF assembly

At 5,120 hours, performed 2,000 hour service 

At 5,560 hours, performed 500 hour service 

At 6,078 hours, installed NEW auto greaser pump

At 6,078 hours, installed NEW fuel transfer pump

At 6,117 hours, performed 1,000 hour service 

At 6,120 hours, installed NEW fuel priming pump

At 7,464 hours, performed 2,000 hour service 

At 8,175 hours, performed 500 hour service 

At 8,284 hours, installed NEW steering control joystick

When unit arrived in our yard at 8,560 hours, we had local CAT dealer complete the following;

Machine was completely stripped for power washing

Performed CAT TA1 inspection 

Perform performance checks- boost, fuel pressure, hydraulic pressures, transmission pressures, etc.

Change & cut open all filters to inspect for contaminates

Inspect magnetic plugs/screens & suction screens

Update all ECM software as required               

Check for applicable service letters

Serviced emission system as required

Changed DEF filter

Changed spark plug

Marcel Equipment then completed the following;

Cleaned & serviced HVAC system

Shimmed boom at loader frame

Shimmed bucket joint

Resealed both steering cylinders

Line bored steering cylinder bores & installed bushings

Installed NEW pins & bearings in steering cylinders

Resealed right side tilt cylinder

Resealed both lift cylinders

Changed hydraulic oil after resealing all cylinders

Calibrated steering & implement circuits

Installed NEW seat belt

Replaced the left arm rest pins & bushings

Ride control accumulators charged to proper spec

Installed NEW armrests

Adjusted seat slides

Installed NEW engine belt

Completed miscellaneous minor repairs on machine

This unit is ready to go to work.

CAT 980M

Price: $
525000
 CAD
Price: $
392000
 USD
Head Office (Marcel London) London, Ontario, Canada
© 2022 · Marcel · Site by Erentzen.com
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram