Ph/txt: 519-686-1123
TF - ph:  800-265-5747
“Doing it right today…to earn your business tomorrow.”

RECENTLY REBUILT CAT 826H (2006)  UNIT# C3369

MACHINE HOURS: 12811 ECM IDLE HOURS: 1365 of 2532
previous arrow
next arrow
previous arrow
next arrow
Repair / Condition Report

At 10,280 hours CAT dealer performed a complete REBUILD of the machine

Total rebuilt price was $425,000 which included CAT 3 yr/6000 hour powertrain & hydraulic warranty

Machine has been maintained fully by CAT since 8,000 hours

The CAT REBUILD Included:

CAT Reman engine

NEW exhaust wrap

NEW alternator & starter

All NEW harnesses

REBUILT transmission to CAT certified standards

REBUILT torque to CAT certified standards

REBUILT transfer case to CAT certified standards

REBUILT front & rear axles to CAT certified standards

Service brakes were REBUILT with all NEW brake discs

Parking brake assembly was REBUILT

Drive line was completely REBUILT

All NEW u-joints were installed

All hydraulic pumps & motors rebuilt or replaced with Reman

Rad/cooling assemblies were pressure tested

All NEW hoses

Articulation hitch was REBUILT with all NEW pins & bearings

All hydraulic cylinders were resealed

Cab was fully reconditioned

Complete NEW seat assembly & suspension were installed

Blade was reconditioned

NEW pins & bushings in blade

All cosmetic repairs were completed

Machine was sand blasted & painted

Only 2,532 hours on machine since this was completed!

The following are repairs completed by Marcel Equipment at 12,811 hours:

All guards and covers were removed and machine was power washed

Complete visual, operational and mechanical inspections were completed

Engine oil filter was cut open and checked - clean

Transmission oil filters were cut open and checked - clean

Hydraulic oil filters were cut open and checked - clean

Inspected all suction screens - clean

Inspected all magnets - clean

All wheel planetary oil levels good and oils clean

Both differential oil levels good and oils clean

Took the following pressures to ensure within OEM specs:

  • Engine oil pressure
  • Fuel pressure
  • Boost pressure
  • High idle
  • Low idle
  • Full stall
  • Transmission pump
  • Transmission lube
  • Torque inlet & outlet
  • Main relief
  • Pilot relief
  • Steering relief
  • Brake accumulator
  • Brake cut-in & cut-out
  • Brake pressure
  • Steering margin
  • Fan pressure
  • Fan speed

Installed NEW front frame blade bore bushings

NEW bearings installed on blade lift cylinder mounts

NEW solenoid installed on pilot valve

Inspected relay panel - installed NEW breakers

Checked center articulation - good

Checked rear axle oscillation - good

Inspected parking brake 

Inspected auto grease system and all grease lines

Repaired oil leak at fan swivel fittings

Repaired damage on rear axle guards

Installed NEW A/C compressor belt

REBUILT throttle pedal

Installed NEW steering wheel

Installed NEW engine thermostats

Installed NEW heater hose & taps

REBUILT steering compensator valve

Completed all miscellaneous repairs as required

Load tested batteries - good

Checked all gauges, controls, switches, lights

Checked wipers & back up alarm

This is an excellent compactor

Very low hour since total CAT rebuild.

 

RECENTLY REBUILT CAT 826H

Price: $
0
 CAD
Price: $
0
 USD
Head Office London, Ontario, Canada

RECENTLY REBUILT CAT 826H (2006)UNIT# C3369

MACHINE HOURS: 12811 ECM IDLE HOURS: 1365 of 2532
Repair / Condition Report

At 10,280 hours CAT dealer performed a complete REBUILD of the machine

Total rebuilt price was $425,000 which included CAT 3 yr/6000 hour powertrain & hydraulic warranty

Machine has been maintained fully by CAT since 8,000 hours

The CAT REBUILD Included:

CAT Reman engine

NEW exhaust wrap

NEW alternator & starter

All NEW harnesses

REBUILT transmission to CAT certified standards

REBUILT torque to CAT certified standards

REBUILT transfer case to CAT certified standards

REBUILT front & rear axles to CAT certified standards

Service brakes were REBUILT with all NEW brake discs

Parking brake assembly was REBUILT

Drive line was completely REBUILT

All NEW u-joints were installed

All hydraulic pumps & motors rebuilt or replaced with Reman

Rad/cooling assemblies were pressure tested

All NEW hoses

Articulation hitch was REBUILT with all NEW pins & bearings

All hydraulic cylinders were resealed

Cab was fully reconditioned

Complete NEW seat assembly & suspension were installed

Blade was reconditioned

NEW pins & bushings in blade

All cosmetic repairs were completed

Machine was sand blasted & painted

Only 2,532 hours on machine since this was completed!

The following are repairs completed by Marcel Equipment at 12,811 hours:

All guards and covers were removed and machine was power washed

Complete visual, operational and mechanical inspections were completed

Engine oil filter was cut open and checked - clean

Transmission oil filters were cut open and checked - clean

Hydraulic oil filters were cut open and checked - clean

Inspected all suction screens - clean

Inspected all magnets - clean

All wheel planetary oil levels good and oils clean

Both differential oil levels good and oils clean

Took the following pressures to ensure within OEM specs:

  • Engine oil pressure
  • Fuel pressure
  • Boost pressure
  • High idle
  • Low idle
  • Full stall
  • Transmission pump
  • Transmission lube
  • Torque inlet & outlet
  • Main relief
  • Pilot relief
  • Steering relief
  • Brake accumulator
  • Brake cut-in & cut-out
  • Brake pressure
  • Steering margin
  • Fan pressure
  • Fan speed

Installed NEW front frame blade bore bushings

NEW bearings installed on blade lift cylinder mounts

NEW solenoid installed on pilot valve

Inspected relay panel - installed NEW breakers

Checked center articulation - good

Checked rear axle oscillation - good

Inspected parking brake 

Inspected auto grease system and all grease lines

Repaired oil leak at fan swivel fittings

Repaired damage on rear axle guards

Installed NEW A/C compressor belt

REBUILT throttle pedal

Installed NEW steering wheel

Installed NEW engine thermostats

Installed NEW heater hose & taps

REBUILT steering compensator valve

Completed all miscellaneous repairs as required

Load tested batteries - good

Checked all gauges, controls, switches, lights

Checked wipers & back up alarm

This is an excellent compactor

Very low hour since total CAT rebuild.

 

RECENTLY REBUILT CAT 826H

Price: $
0
 CAD
Price: $
0
 USD
Head Office London, Ontario, Canada
© 2022 · Marcel · Site by Erentzen.com
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram