The following are repairs completed by the CAT dealer prior to Marcel Equipment owning the machine;
At 13,777 hours, CAT dealer completed a Powertrain Rebuild which included;
Machine was fully maintained by CAT since Rebuild
At 14,972 hours, NEW A/C compressor installed
At 14,972 hours, NEW cab blower fan installed
At 15,548 hours, NEW blade lift cylinder yoke & bearings
At 15,548 hours, NEW hydraulic fan motor installed
At 16,844 hours, steering cylinder barrel end pins & bushings replaced with NEW
At 16,844 hours, NEW steering column/shaft installed
At 16,844 hours, resealed transmission cooler
At 17,883 hours, articulation hitch was REBUILT
At 17,883 hours, steering cylinder rod end pins & bushings replaced with NEW
At 17,888 hours, NEW fuel injectors & fuel transfer pump were installed
| Price: $ 0 CAD |
| Price: $ 0 USD |
CAT 826G II (2002) UNIT# C4924 MACHINE HOURS: 19287 ECM IDLE HOURS: 2717 since 13,777 hours | |||
|---|---|---|---|
Repair / Condition Report The following are repairs completed by the CAT dealer prior to Marcel Equipment owning the machine; At 13,777 hours, CAT dealer completed a Powertrain Rebuild which included;
Machine was fully maintained by CAT since Rebuild At 14,972 hours, NEW A/C compressor installed At 14,972 hours, NEW cab blower fan installed At 15,548 hours, NEW blade lift cylinder yoke & bearings At 15,548 hours, NEW hydraulic fan motor installed At 16,844 hours, steering cylinder barrel end pins & bushings replaced with NEW At 16,844 hours, NEW steering column/shaft installed At 16,844 hours, resealed transmission cooler At 17,883 hours, articulation hitch was REBUILT At 17,883 hours, steering cylinder rod end pins & bushings replaced with NEW At 17,888 hours, NEW fuel injectors & fuel transfer pump were installed
| CAT 826G II
Head Office (Marcel London) London, Ontario, Canada | ||
