Ph/txt: 519-686-1123
TF - ph:  800-265-5747
“Doing it right today…to earn your business tomorrow.”

CAT 772G (2018)  UNIT# T4089

MACHINE HOURS: 6990 LOAD FACTOR: 19% NEUTRAL HOURS: 3166
previous arrow
next arrow
previous arrow
next arrow
Repair / Condition Report

The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine;

At 470 hours, performed 500 hour service

At 1,006 hours, performed 1,000 hour service

At 1,533 hours, performed 500 hour service

At 1,967 hours, performed 2,000 hour service

At 2,440 hours, performed 500 hour service

At 2,935 hours, performed 1,000 hour service

At 3,476 hours, performed 500 hour service

At 3,813 hours, installed NEW NRS cooler 

At 4,000 hours, performed 2,000 hour service

At 4,993 hours, performed 1,000 hour service

At 5,677 hours, performed 500 hour service

At 6,022 hours, performed 2,000 hour service

At 6,022 hours, cleaned DPF 

At 6,233 hours, replaced rear axle wheel seals 

At 6,524 hours, performed 500 hour service

When unit arrived in yard, local CAT dealer completed the following;

Machine was completely stripped for power washing

Performed CAT TA1 inspection

Performed performance pressure checks on engine, torque, transmission & hydraulic systems;

  • Engine high & low idle
  • Engine oil high & low idle 
  • Fuel 
  • Full stall boost
  • Full stall speed
  • Transmission pump 
  • Transmission lube 
  • Hoist relief 
  • Steering system 
  • Brake system cut-in/cut-out 

Changed & cut open all filters to inspect for contaminates

Inspected magnetic plugs/screens & suction screens

Updated all ECM software as required              

Checked for applicable service letters

Serviced emission system as required

Changed DEF filter

Changed spark plug

Changed NOX sensors

Changed DEF injector

Marcel Equipment then completed the following;

Our own operational & visual inspections

Installed NEW rear suspension cylinder boots/covers

Installed NEW pins & bearings on steering tie rod Y-joint

Line bored rear box bores

Installed NEW pins & bearings on rear box joints

Minor repairs as required based on TA inspection & our inspections. 

CAT 772G

Price: $
0
 CAD
Price: $
0
 USD
Head Office (Marcel London) London, Ontario, Canada

CAT 772G (2018) UNIT# T4089

MACHINE HOURS: 6990 LOAD FACTOR: 19% NEUTRAL HOURS: 3166
Repair / Condition Report

The following are repairs completed by the CAT Dealer prior to Marcel Equipment owning the machine;

At 470 hours, performed 500 hour service

At 1,006 hours, performed 1,000 hour service

At 1,533 hours, performed 500 hour service

At 1,967 hours, performed 2,000 hour service

At 2,440 hours, performed 500 hour service

At 2,935 hours, performed 1,000 hour service

At 3,476 hours, performed 500 hour service

At 3,813 hours, installed NEW NRS cooler 

At 4,000 hours, performed 2,000 hour service

At 4,993 hours, performed 1,000 hour service

At 5,677 hours, performed 500 hour service

At 6,022 hours, performed 2,000 hour service

At 6,022 hours, cleaned DPF 

At 6,233 hours, replaced rear axle wheel seals 

At 6,524 hours, performed 500 hour service

When unit arrived in yard, local CAT dealer completed the following;

Machine was completely stripped for power washing

Performed CAT TA1 inspection

Performed performance pressure checks on engine, torque, transmission & hydraulic systems;

  • Engine high & low idle
  • Engine oil high & low idle 
  • Fuel 
  • Full stall boost
  • Full stall speed
  • Transmission pump 
  • Transmission lube 
  • Hoist relief 
  • Steering system 
  • Brake system cut-in/cut-out 

Changed & cut open all filters to inspect for contaminates

Inspected magnetic plugs/screens & suction screens

Updated all ECM software as required              

Checked for applicable service letters

Serviced emission system as required

Changed DEF filter

Changed spark plug

Changed NOX sensors

Changed DEF injector

Marcel Equipment then completed the following;

Our own operational & visual inspections

Installed NEW rear suspension cylinder boots/covers

Installed NEW pins & bearings on steering tie rod Y-joint

Line bored rear box bores

Installed NEW pins & bearings on rear box joints

Minor repairs as required based on TA inspection & our inspections. 

CAT 772G

Price: $
0
 CAD
Price: $
0
 USD
Head Office (Marcel London) London, Ontario, Canada
© 2022 · Marcel · Site by Erentzen.com
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram