The following work was completed by Marcel Equipment:
Upon arrival to our yard, all covers were removed & unit was power washed
Visual & operational inspections were completed
Engine oil & filter changed, filter was cut open & checked for contaminates - clean
Transmission oil & filter changed, filter was checked - clean
Hydraulic filters changed & checked - clean
Checked oil levels in the final drives - good
Checked oil levels in the differentials – good
Engine was serviced
Transmission oil was changed
Inspected all steering joints- good
Inspected box pins- good
Inspected cylinder joints- good
Inspected A-frame & axle sway bar joints- good
Inspected suspension joints- good
Tested secondary steering- good
The following pressures were taken to ensure within OEM specs;
The following repairs were completed ensuring a work ready unit:
Inspected grease system & ensured all joints are getting grease
Replaced required grease lines
Inspected & replaced any required hoses/tubes/lines
Installed NEW window wiper motor assembly
Installed NEW fender mud guards
Installed NEW A/C receiver/dryer & charged
Inspected cab & ensured all switches operated
Serviced & inspected batteries & connections
Machine was sandblasted, painted & detailed
This is a very low hour, work ready machine.
| Price: $ 0 CAD |
| Price: $ 0 USD |
CAT 770 (2008)UNIT# T3585 MACHINE HOURS: 5240 ECM IDLE HOURS: 4597 LOAD FACTOR: 9% | |||
|---|---|---|---|
Repair / Condition Report The following work was completed by Marcel Equipment: Upon arrival to our yard, all covers were removed & unit was power washed Visual & operational inspections were completed Engine oil & filter changed, filter was cut open & checked for contaminates - clean Transmission oil & filter changed, filter was checked - clean Hydraulic filters changed & checked - clean Checked oil levels in the final drives - good Checked oil levels in the differentials – good Engine was serviced Transmission oil was changed Inspected all steering joints- good Inspected box pins- good Inspected cylinder joints- good Inspected A-frame & axle sway bar joints- good Inspected suspension joints- good Tested secondary steering- good The following pressures were taken to ensure within OEM specs;
The following repairs were completed ensuring a work ready unit: Inspected grease system & ensured all joints are getting grease Replaced required grease lines Inspected & replaced any required hoses/tubes/lines Installed NEW window wiper motor assembly Installed NEW fender mud guards Installed NEW A/C receiver/dryer & charged Inspected cab & ensured all switches operated Serviced & inspected batteries & connections Machine was sandblasted, painted & detailed This is a very low hour, work ready machine. | CAT 770
Head Office (Marcel London) London, Ontario, Canada | ||
