The servicing CAT dealer performed the following repairs:
At 7,983 hours, engine was REBUILT using a CAT reman long block
NEW engine oil pump was installed
NEW turbo charger installed
Radiator and after cooler were removed, cleaned, tested & resealed
Many hoses were replaced at this time
At 6,538 hours:
Installed NEW DPF on emissions system
Rebearing and reseal completed on front and rear axles
Updated gear sets for differentials were installed
Torque converter was resealed and NEW springs and rollers for lock up clutch were installed
All NEW updated modulating valves were installed on transmission
Installed NEW u-joints in rear form
All required hoses in chassis were replaced
Upon arrival to yard, Marcel Equipment completed the following:
Removed all guards to power wash unit
Both visual and operational inspections were done
A complete mechanical inspection was done
Engine oil and filter changed, oil filter was cut open and checked for contaminates, it was clean
Transmission filter was cut open and checked, it was clean
Transmission oil strainer checked, it was clean
Hydraulic filters were cut open and they were clean
All four wheel planetary levels good and oils clean
Both differential oil levels good and oils were clean
The following repairs were completed by Marcel Equipment:
Resealed both steering cylinders
Resealed blade lift cylinder
NEW bearings installed on blade lift cylinder mounting bracket
Installed 4 NEW batteries
Checked the following pressures to ensure within OEM specs:
- Transmission
- Hydraulic
- Engine oil
- Fuel
- Boost
- Brake accumulator
Articulation checked (all good)
Rear axle oscillation checked - all good
Checked all grease lines & greased machine
Checked all gauges, controls, lights, heater & A/C - all good
This is a low hour, well maintained unit, that is work ready.
Price: $ 0 CAD |
Price: $ 0 USD |
RECONDITIONED CAT 826K (2015)UNIT# C0350 MACHINE HOURS: 8740 ECM IDLE HOURS: 4037 | |||
---|---|---|---|
![]() Repair / Condition Report The servicing CAT dealer performed the following repairs: At 7,983 hours, engine was REBUILT using a CAT reman long block NEW engine oil pump was installed NEW turbo charger installed Radiator and after cooler were removed, cleaned, tested & resealed Many hoses were replaced at this time At 6,538 hours: Installed NEW DPF on emissions system Rebearing and reseal completed on front and rear axles Updated gear sets for differentials were installed Torque converter was resealed and NEW springs and rollers for lock up clutch were installed All NEW updated modulating valves were installed on transmission Installed NEW u-joints in rear form All required hoses in chassis were replaced Upon arrival to yard, Marcel Equipment completed the following: Removed all guards to power wash unit Both visual and operational inspections were done A complete mechanical inspection was done Engine oil and filter changed, oil filter was cut open and checked for contaminates, it was clean Transmission filter was cut open and checked, it was clean Transmission oil strainer checked, it was clean Hydraulic filters were cut open and they were clean All four wheel planetary levels good and oils clean Both differential oil levels good and oils were clean The following repairs were completed by Marcel Equipment: Resealed both steering cylinders Resealed blade lift cylinder NEW bearings installed on blade lift cylinder mounting bracket Installed 4 NEW batteries Checked the following pressures to ensure within OEM specs: - Transmission - Hydraulic - Engine oil - Fuel - Boost - Brake accumulator Articulation checked (all good) Rear axle oscillation checked - all good Checked all grease lines & greased machine Checked all gauges, controls, lights, heater & A/C - all good This is a low hour, well maintained unit, that is work ready. | RECONDITIONED CAT 826K
Head Office London, Ontario, Canada |