The following was completed by Marcel Equipment:

Upon arrival to our yard, all covers & guards were removed & machine was power washed

Visual & operational inspections were completed

Engine oil filter cut open & checked for contaminates - clean

Transmission filter was cut open & checked - clean

Hydraulic filter was cut open & checked - clean

All suction screens & magnets were checked - clean

Checked both differentials - oil levels good & oils clean

Changed all oils

Changed coolant

Checked brake system - good

Checked parking brake - good

Checked articulation - good

Verified the following pressures to ensure within OEM spec;

Transmission pump

Transmission lube

Torque inlet/outlet

Steering

Pilot

Implement

Accumulator

Engine oil

Fuel

Boost

Stall speed & full stall

Installed NEW engine thermostat

Installed REBUILT fuel injectors

Installed REBUILT turbo

Installed NEW exhaust manifold

Due to oil pan leaking we took the opportunity to;

Installed NEW crankshaft bearings

Installed NEW rod bearings

Installed NEW thrust bearings

Inspected engine oil pump

Installed NEW steering pins & bearings

Resealed steering cylinders

Installed NEW blade lift cylinder yoke bushing

Installed NEW blade lift cylinder trunnion bushings

Rechromed lift cylinder rod & resealed cylinder

Installed NEW fuel cap

Installed NEW fuel level sender

Cleaned & serviced complete HVAC system

Serviced a/c system

Reconditioned cab

Checked all gauges, controls, switches & lights

Installed NEW monitor in cab

Installed NEW back-up alarm

Serviced electrical bay

Installed NEW fan & a/c belts

Replaced required lines, hoses & tubes

Completed all required miscellaneous repairs

Checked all grease lines & greased unit

Tested & serviced batteries & connections

All mechanical & cosmetic repairs have been completed

Machine will then be sand blasted, primed, painted & new decals applied.