Ph/txt: 519-686-1123
TF - ph:  800-265-5747
“Doing it right today…to earn your business tomorrow.”

CAT 814F (1999)  UNIT# D1595

MACHINE HOURS: 16193
previous arrow
next arrow
previous arrow
next arrow
Repair / Condition Report

Engine was previously REBUILT by the CAT dealer - Dean Machinery

Transmission was also previously REBUILT by the CAT dealer - Dean Machinery

Upon arrival to our yard, the following repairs were completed by Marcel Equipment Limited at 16,193 hours:

All covers and guards were removed and unit was power washed

Engine oil and filter were changed, filter was cut open and checked, it was clean

Transmission filter and oil were changed, filter was checked, it was clean

Changed the hydraulic oil,  filter was cut open and it was clean

Front & rear differential oil levels good and oils clean

Fuel filter was changed

Inner & outer air filters were checked and they were clean

Checked the parking brake 

Replaced the A/C belt

Replaced the serpentine belt

Replaced the left work light

Replaced the right tail light

Checked the fan hub 

Installed a NEW pin and bearing on the rod end of the left steering cylinder

Installed a NEW pin and bearing on the right steering cylinder

Resealed the right steering cylinder

Installed NEW hydraulic cooler tubes

Resealed both pilot valves

Installed 2 NEW batteries

REBUILT the left cylinder yoke using NEW bearings

REBUILT the turbo charger

Installed a NEW backup alarm

Checked all grease points and greased unit

Checked the articulation 

Checked the rear axle oscillation 

REBUILT the seat using NEW bearings, sliders, cushion and arm rest

Checked all hoses

Installed NEW heater hoses

Checked the engine block heater

All pressures were taken and are within CAT specifications

This unit is in good condition and is ready to work.

CAT 814F

Price: $
145000
 CAD
Price: $
117000
 USD
Head Office London, Ontario, Canada

CAT 814F (1999)UNIT# D1595

MACHINE HOURS: 16193
Repair / Condition Report

Engine was previously REBUILT by the CAT dealer - Dean Machinery

Transmission was also previously REBUILT by the CAT dealer - Dean Machinery

Upon arrival to our yard, the following repairs were completed by Marcel Equipment Limited at 16,193 hours:

All covers and guards were removed and unit was power washed

Engine oil and filter were changed, filter was cut open and checked, it was clean

Transmission filter and oil were changed, filter was checked, it was clean

Changed the hydraulic oil,  filter was cut open and it was clean

Front & rear differential oil levels good and oils clean

Fuel filter was changed

Inner & outer air filters were checked and they were clean

Checked the parking brake 

Replaced the A/C belt

Replaced the serpentine belt

Replaced the left work light

Replaced the right tail light

Checked the fan hub 

Installed a NEW pin and bearing on the rod end of the left steering cylinder

Installed a NEW pin and bearing on the right steering cylinder

Resealed the right steering cylinder

Installed NEW hydraulic cooler tubes

Resealed both pilot valves

Installed 2 NEW batteries

REBUILT the left cylinder yoke using NEW bearings

REBUILT the turbo charger

Installed a NEW backup alarm

Checked all grease points and greased unit

Checked the articulation 

Checked the rear axle oscillation 

REBUILT the seat using NEW bearings, sliders, cushion and arm rest

Checked all hoses

Installed NEW heater hoses

Checked the engine block heater

All pressures were taken and are within CAT specifications

This unit is in good condition and is ready to work.

CAT 814F

Price: $
145000
 CAD
Price: $
117000
 USD
Head Office London, Ontario, Canada
© 2022 · Marcel · Site by Erentzen.com
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram