VOLVO A30D ARTICULATED TRUCK (2006) - Unit #T0569
Machine Hours: 9569

VOLVO A30D Articulated Truck




Price: Call for details
  • WARRANTY INCLUDED
  • Volvo D9AAEE2 Engine
  • Engine Block Heater
  • Powershift/Autoshift Transmission
  • Cab (ROPS) with Air Conditioning
  • Transmission Retarder System
  • Exhaust Retarder
  • Automatic Torque Lockup
  • Secondary Steering
  • 31 Ton Capacity
  • 100% Differential Lock on All Axles
  • 750/65R25 Wide Tires
  • Rear Window Protection Guard
  • Volvo Matris Report is Available
  • Heater, Lights, Wipers, Mirrors
  • AM/FM Radio
  • Rated at 319 HP.
  • Approximately 50,840 LBS.


Repair / Condition Report

Upon arrival to our yard, all covers and guards were removed and unit was powerwashed.

Visual and operational inspections were completed by Marcel Equipment Limited.

Following is a list of repairs completed by Marcel Equipment Limited at 9574 hours:

Engine oil and filter were changed.

Engine oil filter was cut open and checked for contaminates, it was clean.

Transmission oil and filter were changed.

Transmission filter was cut open and checked for contaminates, it was clean.

Hydraulic oil filters were changed and filters were cut open and checked. They were clean.

All three differentials and all six planetaries were checked, oil levels were good and oils were clean.

Checked the six wheel drive as there were some issues with the diff lock.

Removed and REBUILT the transfer case which included installing a NEW differential updated system and NEW actuator forks.

Checked all brake pads and replaced the ones that needed replacing.

NEW drive shaft was installed between the front differential and the transfer case.

NEW bearings were installed on the rear suspension walking beams.

Six NEW fuel injectors were installed and we took the opportunity to install NEW injector sleeves at the same time.

Installed NEW heater controls and cables.

Installed two NEW mirrors.

Resealed and rebearinged the left steering cylinder.

Installed two NEW box guides.

NEW pins and bearings installed on the box hinge.

Installed NEW front wheel seals - duo cone.

Resealed the fuel pump drive.

Replaced the fuel filter housing.

A NEW radio antenna was installed.   

A NEW heater fan motor was installed.

A NEW radiator overflow tank was installed.

Checked for any air leaks.

Installed a NEW starter relay.

Installed a NEW master switch.

A NEW seat assembly was installed.

Checked the switches, controls and gauges for proper operation.

Checked all grease points and greased unit.

This unit is now ready to work.