CAT 826G LANDFILL COMPACTOR (1999) - Unit #C5493
Machine Hours: 18196

Price: Call for details
  • Cat 3406 DITA Engine
  • Engine Block Heater
  • Powershift Transmission
  • Cab (ROPS) with Air Conditioning
  • Reversible Cooling Fan
  • Full Hydraulic Brakes
  • Front and Rear Striker Bars
  • Cat Step 48" Compaction Wheels
  • Caterpillar Straight Landfill Blade
  • Lights, Mirrors, Wipers, Heater
  • Maintained by CAT Dealer
  • Rated at 340 HP.
  • Approximately 77,000 LBS.

Repair / Condition Report

This unit was mainly maintained by the servicing Caterpillar dealer.

They completed the majority of the repairs as well as all of the 1000/2000 hour services throughout.

The transmission was REBUILT by the Caterpillar dealer at 8900 hours and included the installation of NEW radiator cores, fan motor and pump as well as an implement pump.

Upon purchase inspection, we completed the following:

All covers and guards were removed and this machine was powerwashed.

We changed the engine oil and cut open the filter to check for contaminates, it was clean.

Transmission and hydraulic filters were also clean.

Both differentials were checked and planetary oils for any signs of wear or steel particles. They were clean.

The center articulation was checked and it was good.

The rear axle oscillation was checked and it was good.

Checked the accumulator charge pressure and verified to Caterpillar specifications.

Checked and verified that the transmission, torque converter, hydraulic and engine pressures are to Caterpillar specifications.

The following is a list of repairs completed by Marcel Equipment imited:

Replaced any required hoses, lines or tubes.

Replaced any required grease lines.

Changed the a/c and alternator belts.

The seat assembly was REBUILT

Repaired the steering column.

Changed the steering valves.

 REBUILT the parking brake assembly with  NEW shoes.

Installed NEW pins and bushings in the rod end of the steering cylinders.

The blade cylinder mount and yoke assembly were REBUILT

Resealed the starter.

Resealed the fuel-ratio control.

Serviced and cleaned the complete HVAC system.

Removed and cleaned the evaporator and blower assembly.

Serviced and repaired the electrical panel.

Verified that all the lights and switches were operational.

Greased machine.

Installed four NEW batteries.

Serviced the battery connections.

This unit is scheduled to have cosmetic work completed shortly.

This unit will then be sandblasted and painted. New photos will be posted upon completion.