KOMATSU WA500-7 WHEEL LOADER (2014) - Unit #L2559
Machine Hours: 4402 - ECM Idle Hours: 1056

Komatsu WA500-7 Wheel Loader


  • Komatsu SAA6D140E-6 Engine
  • Autoshift/Powershift Transmission
  • Stick and Wheel Steering
  • Cab (ROPS) with Air Conditioning
  • Torque Converter Lockup
  • Auto Reverse Cooling Fan
  • 8 Cubic Yard GP Bucket with BOE
  • In Cab Bucket and Boom Positioner
  • 29.5 x 25 Michelin Tires
  • Ride Control
  • Rear View Camera
  • Heated Seat
  • Radio, Wipers, Heater, Lights
  • Rated at 353 Net HP.
  • Approximately 76,500 LBS.

Repair / Condition Report

Upon arrival, this unit was serviced and checked over.

We removed all covers from the machine and completely washed it.

Engine filter was cut open and checked for contaminates, it was clean.

Engine was then serviced.

NEW engine air filters were installed.

Transmission oil filter was cut open and checked for contaminates and it was clean.

Transmission suction screen was checked and it was clean.

Transmission oil was changed.

Hydraulic filters were cut open as well and both were clean.

Front and rear differentials and all four wheel planetaries were checked, oil levels were good and oils were nice and clean.

Machine was fully greased.

Upon purchase inspection, the following repairs were completed:

Installed a NEW belt for the a/c compressor and alternator.

Verified the accumulator pressure.

Inspected the articulation hitch and it was tight.

Inspected the rear axle oscillation and it was tight.

Tested and serviced the batteries and connections.

Bucket re-lined with AR400.

Completed miscellaneous repairs as needed.

The following pressure tests were performed by Marcel Equipment Limited:

- Engine low idle

- Engine high idle

- Engine oil pressure

- Transmission charge pressure

- Torque converter output pressure

- Steering pressure

- Hydraulic pressure

- Fan speed

This unit is completed and is ready to go to work.