KOMATSU HD325-7 RIGID FRAME ROCK TRUCK (2013) - Unit #T7319
Machine Hours: 6047

Prior to purchase, Marcel Equipment’s technician inspected this truck both visually and operationally.

Once truck arrived in our yard, truck was stripped and completely powerwashed.

The local Komatsu dealer then completed the following:

Completed a Komatsu inspection on truck and noted any deficiencies.

Cut open all fluid filters and inspected for contaminates - All were clean.

Serviced unit with all NEW filters and breathers.

Checked all oil levels.

Checked oils for any contamination (dark/milky/etc).

Completed engine, torque, transmission and hydraulic pressure checks - All are within OEM specifications.

Performed performance checks - All are within OEM specifications.

Inspected transmission magnetic suction screen and it was clean.

Inspected the magnetic plugs and they were clean.

Completed miscellaneous repairs as directed.

Downloaded ECM’s for all logged and active fault codes.

Marcel Equipment Limited then completed the following:

Our full operational and visual inspection was completed again.

Completed repairs as noted on Komatsu inspection.

Completed repairs as noted on our own inspection.

Verified autogreaser was operation and ensured that all grease points are taking grease.

Completed any required welding and cosmetic repairs.

Tires were replaced as required - 2 NEW front tires were installed.

Replaced the cracked windshield.

Load tested the batteries.

Checked all switches, gauges and controls.

Checked the air conditioning.

Checked all the lights.

Checked all drive lines and grease.

Checked all grease lines.

Checked the auto grease system.

Installed a NEW radio antenna.

Installed a NEW fan belt.

Checked the emergency steering system and it was good.

Installed safety mirrors.

All maintenance, servicing and repairs have been completed.

This is an excellent low hour truck that is ready to work.