JOHN DEERE 624K WHEEL LOADER (2012) - Unit #L7427
Machine Hours: 5653

Click the View Video button to view available video.

John Deere 624K Wheel Loader

Price: Call for details
  • John Deere PowerTech Plus 6068H Engine
  • US and Canadian EPA Compliant
  • Engine Block Heater
  • Reverse Fan Drive
  • Powershift Transmission
  • Differential Lock
  • Cab (ROPS) with Air Conditioning
  • 4 Cubic Yard GP Bucket with BOE
  • Axle Cooler
  • Front Windshield Guard
  • Full Waste Handler Guard System
  • Well Maintained Ex-Municipal Unit
  • Fire Extinguisher
  • Rear View Camera
  • Lights, Wipers, Heater
  • Beacon Lamp, Inside Mirror, Radio
  • Rated at 198 HP.
  • Approximately 38,500 LBS.

Repair / Condition Report

Upon arrival to our yard, this unit was stripped of all covers and guards and was powerwashed, checked over and serviced.

Engine oil filter was cut open and checked for any contaminates. Filter was nice and clean.

Transmission filter was cut open and checked and it was clean.

Hydraulic filter was also cut open and checked and it was clean as well.

Both differential oil levels were good and oils were clean.

Checked driveline including drive shafts and universal joints and all were good.

Checked the rear axle oscillation and it was good.

REBUILT the articulation, linebored and installed NEW pins and bearings.

Linebored the steering cylinder mount and installed NEW pins and bearings in the rod end.

Installed a NEW boom sensor and actuator.

Installed a NEW rear window washer motor.

Checked that the differential lock was operational and it was good.

The following pressures were checked:

Standby oil pressure = 865 PSI (Specs: 790-870)

Differential pressure = 300 PSI (Specs: 280-330)

Pilot pressure = 600 PSI (Specs: 575-625)

Hydraulic pressure = 3700 PSI (Specs: 3630-3730)

Fan pressure = 250 PSI (Specs: 218-268)

Transmission pressure = 250 PSI (Specs: 218-268)

Torque converter stall speed = 2090 RPM (Specs: 2015-2150 RPM)

Machine was then greased and all miscellaneous items such as lights, heater, wipers, etc. were checked and all were good.

This machine is good and ready to go to work.