CAT D8T WASTE HANDLER CRAWLER TRACTOR (2012) - Unit #D3528
Machine Hours: 13,920





Price: Call for details
  • WARRANTY INCLUDED
  • Caterpillar C15 ACERT Engine
  • Engine Block Heater
  • Powershift Transmission
  • Auto Reverse Cooling Fan 
  • Cab (ROPS) with Air Conditioning
  • Cab air filtration system
  • Differential Steer
  • 26" Track Shoes
  • CAT Semi U Blade with Tilt and Trash Rack
  • Rear Striker Bar with Counterweight and Drawbar
  • Winch and Rippers are also Available
  • Factory Waste Handling Arrangement
  • Clamshell Final Drive Guards
  • Pivot Shaft Seal Guards
  • Turbine Pre-Cleaner
  • Debris Resistant Radiator
  • Fuel Tank Guard
  • Heavy Duty Bottom Guards
  • Fast Fuel Adapter
  • High Speed Oil Change
  • Flood Lighting Package
  • Lights, Wipers, Heater, Mirror
  • In Cab Mirror
  • AM/FM Radio, Beacon Lamp
  • CAT Dealer  Maintained Since New - Records are Available
  • Rated at 348 HP.
  • Approximately 86,000 LBS.


Repair / Condition Report

The following repairs were completed by the CAT dealer prior to Marcel Equipment purchasing the unit:

At 13,601 hours:

- REBUILT engine using a CAT reman long block.

- Installed CAT reman long block.

- Fuel injectors

- Fuel transfer pump

- Engine oil pump

- Engine oil cooler

- Water pump

- Air conditioning compressor

- Turbocharger

- ECM

- Starter and alternator

- EGR cooler

- DPF (emissions filter)

- REBUILT pump drives

- Dyno tested engine after rebuild

- Cleaned and tested rad assembly

- Resealed pivot shaft

At 11,163 hours, CAT dealer installed NEW NRS cooler.

At 10,278 hours:

- Installed CAT reman equalizer bar with new rubber pads and pins.

- Installed NEW pins and bushings in radiator hard nose assembly.

- Installed NEW engine mounts.

At 8513 hours, A NEW evaporator core was installed.

At 8477 hours:

- REBUILT transmission, differential and bevel gear set to CAT certified standards.

- REBUILT torque converter to CAT certified standards.

- REBUILT transmission oil pump.

- REBUILT implement pump.

- REBUILT final drives.

- REBUILT brake assemblies.

- CAT Reman differential steer motor installed.

- CAT Reman transmission cooler installed.

- CAT Reman fan motor installed.

- NEW CAT steer pump was installed.

- Resealed hydraulic control valve assembly.

- Resealed brake control.

- Resealed both lift cylinders.

- Resealed the track adjusters.

- Spent $25,000 on hose replacement throughout machine.

Upon arrival to our yard, Marcel Equipment removed all guards to power wash unit.

A visual and operational inspection was done.

A complete mechanical inspection was done.

All oil filters were removed and cut open to check for contaminates, they were all clean.

Both final drive oil levels were good and oils were clean.

Installed NEW bearings on both blade lift cylinders yokes and caps.

Checked air conditioning - Installed NEW accumulator, dryer and NEW AC lines.

Serviced complete HVAC system.

All switches, gauges and controls checked - all good.

Checked all grease lines and grease unit.

Checked hard bar for play - good.

All engine, transmission, torque converter and hydraulic pressures taken to confirm OEM specs.

All repairs have been completed and unit will soon enter our paint facility for sand blasting, prime, paint and detail.