CAT D8T LGP CRAWLER TRACTOR (2016) - Unit #D7466
Machine Hours: 6553 - ECM Idle Hours: 1471

CAT D8T LGP Crawler Tractor




Price: Call for details
  • WARRANTY INCLUDED
  • Caterpillar C15 ACERT Engine
  • Engine Block Heater
  • Powershift Transmission
  • Auto Reverse Cooling Fan with Brush Guard
  • Cab (ROPS) with Air Conditioning
  • Cab Precleaner
  • Differential Steer
  • NEW CAT Undercarriage - Except Pads
  • 38" Track Shoes
  • CAT Semi U Blade with Tilt - 14'8"
  • Ripper Valve
  • Drawbar
  • Counterweight is Available
  • Winch is Available
  • 4 Barrel MS Ripper is also Available
  • Fast Fuel Adapter
  • High Speed Oil Change
  • Top Carrier Rollers
  • Premium Lighting Package
  • Lights, Wipers, Heater, Mirror
  • AM/FM Radio, Beacon Lamp
  • CAT Dealer Serviced and Maintained Since New - Records are Available
  • Rated at 364 HP.
  • Approximately 75,000 LBS.


Repair / Condition Report

At 4398 hours, Cat dealer REBUILT the left final drive.

At the same time, they rebearinged and resealed the pivot shaft.

Following are the repairs and servicing completed by Marcel Equipment Limited:

Stripped complete machine for powerwashing.

Performed complete operational and visual inspection.

Engine oil filter was cut open and checked for contaminates and it was clean.

Transmission filter was cut open and checked and it was clean.

Powertrain and transmission strainers as well as the magnetic screens were all clean.

Hydraulic filter was also checked and it was clean.

Changed the fuel filters.

Checked final drive oils and plugs and they were clean.

Inspected the equalizer bar joints and they were tight.

Inspected the engine belts and pullies.

Installed a NEW transmission input seal.

Installed a NEW torque convertor output seal.

Replaced hoses as required.

Installed a NEW back-up alarm.

Installed a NEW rad cap.

Installed a NEW a/c condenser fan.

Checked all grease points and greased machine.

Checked all lights, gauges, etc. for proper operation.

Load tested and serviced the batteries and they were all good.

Installed NEW Cat track chains, rollers, idlers and segments.

Repaired blade joints as required using NEW pins and bushings.

Performed the following pressure checks to ensure they were within OEM specifications:

Brake pressure

Transmission pump pressure

Torque inlet pressure

Torque outlet pressure

Transmission lube pressure

Flywheel lube pressure

Steering pressure

Charge pressure

Implement pressure

Engine oil pressure

Boost pressure

Fan pressure and speed