CAT 980K WHEEL LOADER (2012) - Unit #L7529
Machine Hours: 10717 - ECM Idle Hours: 2537

Click the View Video button to view the available video.

CAT 980K WHEEL LOADER - Unit #L7529


  • Caterpillar C13 ACERT Engine
  • Powershift Transmission
  • High Ambient Temperature Cooling Arrangement
  • Cab (ROPS) with AC
  • Joystick Steering
  • Ride Control
  • Flood Light Arrangement
  • Front and Rear Axle Oil Coolers
  • Automatic Greaser
  • Rear View Camera
  • 875/65R29 Bridgestone Tires
  • Choice of 8.73 CU YD GP Bucket (Now On), 7.5 CU YD GP Bucket or 10.75 CU YD Light Material Bucket - See Photos
  • Lights, Wipers, Heater, Mirrors
  • Rated at 406 HP.
  • Approximately 69,000 LBS.

Repair / Condition Report

Upon arrival, this unit was serviced and checked over.

Following are the list of repairs completed by Marcel Equipment Limited at 10707 hours:

Engine filter was cut open and checked for contaminates. It was clean.

Transmission oil filter was cut open and checked for contaminates and it was clean.

Hydraulic and steering filters were cut open as well and both were clean.

Front and rear differentials and all four wheel planetaries were checked, oil levels were good and oils were nice and clean. Primary and secondary fuel filters were changed.

Coolant level was good.

Checked and repaired grease fittings as needed.

Replaced one of the grease lines on the boom.

Checked the transmission oil strainer and it was clean.

Installed a NEW hydraulic tank breather.

Had the left boom lift cylinder resealed by the Cat dealer.

Recalibrated the steering and implement control.

Checked all cab and machine functions.

All pressures were taken and results are available.

This is an excellent, clean and ready to work unit.