CAT 950K WASTE HANDLER WHEEL LOADER (2013) - Unit #L0038
Machine Hours: 6498 - ECM Idle Hours: 2622


Total Neutral Hours: 3792

CAT 950K Waste Handler Wheel Loader




Price: Call for details
  • WARRANTY INCLUDED
  • Caterpillar C7.1 ACERT Engine
  • High Ambient Cooling System
  • Variable Pitch Cooling Fan
  • Powershift Transmission
  • Conventional Steering
  • Cab (ROPS) with Air Conditioning
  • CAT 4.75 Cubic Yard GP Bucket with BOE
  • Extra Rear Counterweight
  • Ride Control
  • 725/70x25 Tires
  • Wheel Seal Guards
  • Complete Waste Handler Package
  • Rear View Camera
  • Air Ride Seat
  • AM/FM Radio, Wipers
  • Heater, Lights, Mirrors
  • Rated at 211 Net HP.
  • Approximately 35,000 LBS.  


Repair / Condition Report

Upon arrival to our yard, all covers and guards were removed and unit was powerwashed.

Visual and operational inspections were completed.

Following is a list of repairs completed by Marcel Equipment Limited at 6488 hours:

Serviced the engine and changed the fuel filters.

Engine oil filter was cut open and checked for contaminates and it was clean.

Transmission filter was cut open and checked for contaminates and it was clean.

Hydraulic filter was also cut open and checked for contaminates and it was clean.

Checked the front and rear differential oil levels and they were good.

Oils in both differentials were nice and clean.

Checked the brakes and they were good.

Replaced the transmission breather vent.

Replaced the fan solenoid vent.

Replaced both differential breather vents.

Repaired the rear hood latch.

Checked the engine precleaner.

Adjusted the margin fan speed pressure.

Checked the ride control and it was good.

Checked the articulation and it was also good.

Checked the rear axle oscillation and it was good.

Checked the brake accumulator pressure.

Checked all great points and greased machine.

Checked all lights and switches for proper operation.

Installed NEW hood guides.

Replaced the front and rear wiper blades.

Installed two NEW mirrors.

Installed NEW bucket wear plates and bolts.

Load tested the batteries and they were good.

Checked the transmission pressure and it was good.

Checked the hydraulic pressure and it was good.

Checked the pilot pressure and it was good.

Checked the steering pressure and it was good.

Checked the fan speed and it was good.

Checked the turbo boost and it was also good.

Engine high and low idles were checked they were good.

Engine oil pressure was checked and it was good.

This is a very clean unit that is ready to work.