CAT 772 RIGID FRAME ROCK TRUCK (2013) - Unit #T8639
Machine Hours: 4820 - ECM Idle Hours: 1061 - 36% Load Factor

CAT 772 Rigid Frame Rock Truck




Price: Call for details
  • WARRANTY INCLUDED
  • Caterpillar C18 ACERT Engine
  • Tier 3 EPA Engine
  • Engine Prelube
  • Engine Block Heater
  • 7 Speed Powershift Transmission
  • Supplemental Steering
  • Cold Weather Arrangement
  • Cab (ROPS) with Air Conditioning
  • Oil Immersed Disc Brakes
  • Extended Life Brakes
  • 51 Ton/41 Cubic Yard Capacity
  • Dual Slope High Impact Body
  • Heated Body
  • Tailgate
  • 21.00R33 Tires - 2 NEW Front Tires - Rear Tires in Great Condition
  • Fast Fill Fuel System
  • Traction Control System
  • High Speed Oil Change System
  • Autogreaser 
  • Product Link  
  • Lights, Wipers, Heater, Radio
  • Rated at 598 HP.
  • Approximately 80,000 LBS.


Repair / Condition Report

Prior to purchase, Marcel Equipment’s technician inspected the truck visually, operationally and cut open certain filters to inspect for contaminates.

Once truck arrived in our yard, truck was stripped and completely powerwashed.

Toromont Cat then completed the following:

Completed TA inspection on truck and noted any deficiencies.

Cut open all fluid filters and inspected for contaminates - all were clean.

Serviced unit with all NEW filters and breathers.

Checked all oil levels.

Checked oils for any contamination (dark/milky/etc).

Completed engine, torque, transmission and hydraulic pressure checks - All are within OEM specifications.

Performed performance checks - All are within OEM specifications.

Inspected transmission magnetic suction screen and it was clean.

Inspected magnetic plugs and all were clean.

Completed miscellaneous repairs as directed.

Updated all ECM software and downloaded the ECM information.

Marcel Equipment Limited then completed the following:

Full operational and visual inspection was completed again.

Completed repairs as noted on the Cat TA inspection.

Completed repairs as noted on our own inspection.

Verified autogreaser was operational and ensured that all grease points are taking grease.

Completed any required welding and cosmetic repairs.

Tires were replaced as required and two NEW tires were installed on the front.

Repair notes will be updated once completed.

This unit will be a work ready and reliable unit.