CAT 725C ARTICULATED TRUCK (2014) - Unit #T3148
Machine Hours: 3225 - ECM Idle Hours: 1171

CAT 725C Articulated Truck




   $369,000.00
   $298,000.00

  • WARRANTY INCLUDED
  • Caterpillar C9.3 ACERT Engine
  • Cab (ROPS) with Air Conditioning
  • Powershift/Autoshift Transmission
  • Secondary Steering
  • Retarder
  • Differential Lock System
  • 23.5 x 25 Bridgestone Radial Tires
  • Tailgate
  • 26 Ton Capacity
  • Rear View Camera
  • Rear Window Guard
  • AM/FM Radio
  • Heater, Wipers, Lights, Mirrors
  • CAT Dealer Maintained
  • CAT TA1 Plus Complete Inspection Available
  • Rated at 320 GHP.
  • Approximately 52,000 LBS.


Repair / Condition Report

Upon purchase, this unit was taken to Toromont CAT (our local Caterpillar Dealer) and a Complete TA1 Plus Inspection was completed and unit was serviced.

The TA1 Plus Inspection included the following:

Removed the engine oil filter, cut it open and checked for contaminates and it was clean.

Removed the hydraulic filter, cut it open and checked for contaminates and it was clean.

Removed the transmission filter, cut it open and checked for contaminates and it was clean.

SOS oil samples were taken on all components.

All three differential oil levels were good and oils were clean.

All six wheel planetary oil levels were good and oils were clean.

Updated the software in all the electronic control modules.

NEW oil in the engine.

NEW T04-30 oil in the transmission.

Hooked up the manual gauges to take pressures, flashed all the ECM and calibrated the transmission.

Verified that the following pressures were all within Caterpillar specifications:

Transmission Lube Pressure = 26 PSI (Specs: 23+-5)

Torque Outlet Pressure = 34 PSI (Specs: 30+-5)

Torque Inlet Pressure = 72 PSI (Specs: 70+-5)

First Forward Pressure = 255 PSI (Specs: 260+-20)

First Reverse Pressure = 258 PSI (Specs: 260+-20)

Fuel Pressure - High Idle = 121 PSI

Fuel Pressure - Low Idle = 111 PSI

Boost Pressure - High Idle = 8 PSI

Boost Pressure - Low Idle = 1 PSI

Engine Oil Pressure - High Idle = 81 PSI

Engine Oil Pressure - Low Idle = 71 PSI

Hydraulic Pressure - While Lifting Box = 215 PSI

Records for the above are available upon request.

Following are the repairs and checks completed by Marcel Equipment Limited at 2908 Hours:

Checked the air conditioning for proper operation.

Checked all grease points and greased unit.

Checked all the differential locks.

Checked all the lights, switches, gauges, etc. for proper operation.

Load tested the batteries.

This is a very low hour unit that is ready to go.