CAT 320EL HYDRAULIC EXCAVATOR (2013) - Unit #E6934
Machine Hours: 2990 - ECM Idle Hours: 456

CAT 320EL Hydraulic Excavator

Price: Call for details
  • Caterpillar C6.6 ACERT Engine
  • Cold Weather Arrangement
  • Cab with Air Conditioning
  • CAT Hydraulic Quick Coupler
  • 48" Bucket with Teeth (1.8 CY)
  • Auxiliary Hydraulic System
  • Hydraulic Pattern Control
  • 9 Foot 7 Inch Stick Assembly
  • Straight Travel Pedal
  • 31" TBG Pads
  • Rear View Camera
  • Lights, Wipers, Mirror
  • Heater, Radio
  • Rated at 164 HP.
  • Approximately 48,000 LBS.

Repair / Condition Report

Upon arrival to our yard, this unit was powerwashed, serviced and checked over.

Engine oil filter was cut open and checked for contaminates and it was clean.

All hydraulic filters were cut open and checked and they were clean.

Both final drive oil levels were good and oils were clean.

Installed one NEW track carrier roller.

Repaired all lights, wipers and gauges as needed.

Installed a boom pressure sensor.

Resealed the bucket cylinder.

Load tested the batteries.

Installed a NEW cab filter.

Checked all grease points and greased unit.

Checked unit for operational functions and all were good.

Hydraulic pressure tests were taken:

Engine Oil Pressure = 80 PSI

Pilot Pressure = 590 PSI

Main Hydraulic Pressure = 5104 PSI

Heavy Pressure = 5550 PSI

Boom Pressure Extend = 5810 PSI

Boom Pressure Retract = 5370 PSI

Stick Pressure Extend = 5365 PSI

Stick Pressure Retract = 5800 PSI

Bucket Pressure Extend = 5360 PSI

Bucket Pressure Retract = 5370 PSI

Travel Pressure - Left Forward = 5375 PSI

Travel Pressure - Left Reverse = 5370 PSI

Travel Pressure - Right Forward = 5370 PSI

Travel Pressure - Right Reverse = 5375 PSI

All above pressures are within Caterpillar specifications.

This is a good reliable machine that is ready to work.